 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Clock Oscillator PX-701 Features Reflow Process Compatible Surface Mount Package AT-Cut Crystal SONET Minimum Clock Specification Low Phase Noise Tight Tolerances Previous Vectron Model Numbers Frequency Range Standard Frequencies C1260 1 MHz - 175 MHz Typical Applications Base Stations Test Equipment Synthesizers 17.408; 24.705; 30.720; 32.768; 34.368; 50; 76.8 MHz 77.76; 100; 125; 150; 155.52; 156.25; 175 MHz Frequency stabilities1 [Standard] Parameter vs. operating temperature range (Referenced to +25C) Min -10.0 Typ Max +10.0 Units ppm Operating temperature range -20 ... +70C Parameter Initial tolerance vs. supply voltage change vs. load change vs. aging vs. aging /1. Year Min -5.0 -1.0 -1.0 -3.0 -1.0 Typ Max. +5.0 +1.0 +1.0 +3.0 +1.0 Units ppm ppm ppm ppm ppm Condition VS 5% Load 5% / year (followingYears) htttp://www.vectron.com Vectron International*267 LowellRoad, Hudson, New Hampshire 03051*Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG * Landstrae, 74924 Neckarbischofsheim, Germany * Tel: +49 7268 801 100 FX-701 page: 1/7 Frequency stabilities1 [SC Cut Crystal-Option-10 to 52 MHz] Parameter vs. operating temperature range Min Min -20.0 Typ Typ Max Max. +20.0 Units Units ppm Operating temperature range -20 ... +70C Parameter overall tolerance Condition ( 15 Years aging, temp, initial, supply, load ) Supply Voltage (Vs) Parameter Supply voltage (Vs) Current consumption Current consumption Supply voltage (Vs) Current consumption Current consumption Current consumption 3.135 3.3 Min 4.75 Typ 5.0 Max 5.25 40 90 3.465 30 80 25 Units VDC mA mA VDC mA mA mA Condition @ HCMOS @ PECL @ LVHCMOS @ LVPECL @ LVDS RF Output Parameter Signal Load Rise and Fall time Duty cycle Signal Load Rise and Fall time Duty cycle Signal Load Rise and Fall time Duty cycle 40 100 1 60 45 LVDS ns % 10 to 90 % 50 1 55 40 PECL ns % Vs - 2V 20 to 80 % 15.0 5 60 Min Typ HCMOS Max Units pF ns % Condition @ 15 pF 10 to 90 % @ Vs/2 Additional Parameters Parameter Phase Noise Min Typ -85 -120 -145 -155 -160 Max Units dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ps RMS 10 100 1 10 100 Condition Hz Hz kHz kHz kHz @ 12 kHz to 20 MHz @49,408 MHz HCMOS 3,3V Jitter 0,2 htttp://www.vectron.com Vectron International*267 LowellRoad, Hudson, New Hampshire 03051*Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG * Landstrae, 74924 Neckarbischofsheim, Germany * Tel: +49 7268 801 100 FX-701 page: 2/7 Additional Parameters Parameter Phase Noise Min Typ -80 -108 -134 -140 -141 Max Units dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ps RMS dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ps RMS 10 100 1 10 100 10 100 1 10 100 Condition Hz Hz kHz kHz kHz @ 12 kHz to 20 MHz Hz Hz kHz kHz kHz @ 12 kHz to 20 MHz @125 MHz PECL 3,3V @89,6 MHz PECL 3,3V Jitter Phase Noise 0,6 -80 -115 -135 -141 -141 Jitter Weight Processing & Packing 0,6 2 handling&processing note g Absolute Maximum Ratings Parameter Supply voltage (Vs) Operable temperature range Storage temperature range -30 -40 Min Typ Max 7 +80 +90 Units V C C Condition htttp://www.vectron.com Vectron International*267 LowellRoad, Hudson, New Hampshire 03051*Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG * Landstrae, 74924 Neckarbischofsheim, Germany * Tel: +49 7268 801 100 FX-701 page: 3/7 Enclosure Type G241 < 53 MHz Height "H" 2,3 mm Type G251 > 1 MHz Height "H" 2,3 mm Dimensions: mm Dimensions: mm Pin Connections 1 N/C 2 N/C / Enable (optional) 3 Ground 4 RF Output 5 N/C 6 Supply Voltage Input (Vs) true table Pin 2 High Open Low 1 N/C Pin Connections 2 N/C / Enable (optional) 3 Ground 4 RF Output 5 Complementary RF Output / (N/C: HCMOS only) 6 Supply Voltage Input (Vs) HCMOS Pin 4 Data Data High Tristate Pin 5 N/C N/C N/C LVPECL + LVDS Pin 4 No Data Data Data Pin 5 No Data compl. Data compl. Data Marking PX-701 Frequency AYYWW htttp://www.vectron.com Vectron International*267 LowellRoad, Hudson, New Hampshire 03051*Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG * Landstrae, 74924 Neckarbischofsheim, Germany * Tel: +49 7268 801 100 FX-701 page: 4/7 Typical Phase Noise and Jitter 49,408 MHz; HCMOS output 89,6 MHz; PECL output Frequency range [Hz] 12kHz to 20MHz Jitter [ps rms] 0.188ps Frequency range [Hz] 12kHz to 20MHz Jitter [ps rms] 1.002ps 125 MHz; PECL output Typical frequency stability vs temperature Frequency range [Hz] 12kHz to 20MHz Jitter [ps rms] 0.608ps htttp://www.vectron.com Vectron International*267 LowellRoad, Hudson, New Hampshire 03051*Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG * Landstrae, 74924 Neckarbischofsheim, Germany * Tel: +49 7268 801 100 FX-701 page: 5/7 Standard Shipping Methode A X B P Enclosure Type G218B / G223B *bei W 24 mm nur untere Lochreihe by W 24 mm only lower hole line Lage im Gurt Position in tape Pin 1 Abwickelrichtung Unwinding direction K Gurtunterseite Tape buttom side Gurtoberseite Tape upper side Production tolerance complying DIN IEC 286-3 Tape width W [mm] 24 Quantity per meter 83,3 Quantity per reel 850 Dimension P 12 Recommanded Reflow Profile Profile Feature Average ramp-up rate (TL to Tp) Preheat -Temperature Min Tsmin -Temperature Min Tsmax -Time (min to max) (ts) Pb-Free Assembly/ Sn-Pb Assembly 3C/second max. 150C 200C 60-180 seconds 3C/second max 217C 60-150 seconds max 260C Profile Feature Time 25C to Peak Temperature Time maintainted above -Temperature (TL) -Time (tL) Pb-Free Assembly/ Sn-Pb Assembly 8 minutes max. 217C 60-150 seconds TSmax to TL-Ramp-up Rate Time maintainted above -Temperature (TL) -Time (tL) Peak Temperature (TP) Time within 5C of actual Peak Temperature (tP) Ramp-down Rate 20-40 seconds 6C/ second max Note: All temperatures refer to topside of the package, measured on the package body surface. SMD oscillators must be on the top side of the PCB during the reflow pocess. htttp://www.vectron.com Vectron International*267 LowellRoad, Hudson, New Hampshire 03051*Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG * Landstrae, 74924 Neckarbischofsheim, Germany * Tel: +49 7268 801 100 FX-701 page: 6/7 How to order this product: Use this worksheet to forward the following information to your factory representative : Model PX-701 Height 0 Supply Voltage Code D RF Output Code A Temperature Range J Stability 105 X X Frequency 10MHz Height: 0: 2,3 mm Supply Voltage Code: E: 3,3 V D: 5V RF Output Code: A: HCMOS C: PECL D: LVDS Temperature Range/ Stability Code: J-105: -20...+70C 10ppm J-205: -20...+70C 20ppm over all 1 Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25C) 3 Phase noise degrades with increasing output frequency. 4 Subject to technical modification. 5 Contact factory for availability. Notes: htttp://www.vectron.com Vectron International*267 LowellRoad, Hudson, New Hampshire 03051*Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG * Landstrae, 74924 Neckarbischofsheim, Germany * Tel: +49 7268 801 100 FX-701 page: 7/7 |
Price & Availability of PX-7010-ECJ-105
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |